Walk into the multifunctional electrocardiogram monitor of clinical nursing equipment

Meilun MeilunThe multifunctional electrocardiogram monitor is a necessary instrument in the monitoring room, and it is also standing in many departments. It is mainly used for continuous monitoring and recording of vital signs of critically ill patients at 24h.

Heart rate. Heart rate.

Blood oxygen

breathing

temperature

blood pressure

Sometimes some special indicators are also tested such as:

1. Pulmonary arterial pressure

2. Vein pressure

3. Right ventricular pressure

4. Wait

Multi-functional electrocardiogram monitoring is widely used in clinic, but most of the monitors are mainly composed of the following three parts: display module, parameter module, and computer module. The monitor is generally used continuously for a long period of time, so it will cause the temperature in the machine to be too high and accelerate aging, thereby reducing the service life. So good maintenance and use management is a must.

Ensure good ventilation and heat dissipation.

Clean up dirt, dirt, and dirt regularly.

From half a year to one year, professional demolition machines are cleaned, and each component module is inspected.

All wires and sensors should be handled lightly and must not be dragged to avoid damage

From half a year to one year, professional demolition machines are cleaned, and each component module is inspected.

All wires and sensors should be lightly placed, strictly drag and drop, so as not to damage.

Proper use of ECG monitor

1. Avoid improper selection and use resulting in incorrect monitoring parameters that affect patient care. Therefore, choosing the correct cuff, loosening suitable to avoid monitoring errors, intermittent replacement of the monitoring site, to avoid the absence of ischemia, swelling, bring discomfort to the patient.

2. Electrocardiogram wires, regular cleaning, finishing. Do not pull hard, according to the requirements of patients, avoid the defibrillation site, periodically change the electrode. Pay attention to the patient's skin protection. When the patient's skin dryness is monitored, you can use salt water or alcohol to wipe and paste the electrode.

3. Refers to the use of oxygen probes, pay attention to observe the length of the patient's nails, whether the fingers are clean, and keep the patient's tips warm, otherwise it will affect the test value. Change the test fingers every one to two hours to avoid discomfort to the patient.